Quality Substrate Material
Constructed from high grade magnesium alloy, our condenser anode conforms to meet American standard ASTM B843 – AZ63C.
|Aluminum (Al)||5.3% ~ 6.7%|
|Manganese (Mn)||0.15% ~0.7%|
|Zinc (Zn)||2.5% ~3.5%|
|Silicon (Si)||0.1% max.|
|Copper (Cu)||0.02% max.|
|Iron (Fe)||0.03% max.|
|Nickel (Ni)||0.02% max.|
|Other Impurity (each)||0.05% max.|
|Total Impurities||0.03% max.|
Custom-made Electro-potential Options
Our magnesium condenser anode is normally cast with H-1 alloy for standard potential of -1.55 volts relative to saturated calomel electrode(SCE). High potential magnesium anode is available upon request.
|Open Circuit Potential (-V)||1.5 ~ 1.55|
|Close Circuit Potential (-V)||1.45 ~ 1.5|
|Min. Current Capacity||550 A.h/lbs (1230 A.h/kg)|
|Current Efficiency||55% min.|
Optional Plastisol Coating
Magnesium condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Strict Quality Control
By conforming to ISO 9001:2015 standards, our magnesium condenser anode is manufactured, inspected, and tested in accordance with stringent procedures to ensure high quality.
Standard sizes below are available at Jennings Anodes warehouse. Based on over 50 years’ production experience, Jennings Anodes can customize the anode shape, sizes, and service life to meet your specific needs upon request.
|Item No.||Width||Height||Weight||Insert Dimensions|
|JA-MG-SS11||3.9” (100 mm)||1.2” (30 mm)||1.1 lbs (0.5 kg)||/|
|JA-MG-SS18||3.9” (100 mm)||2.0” (50 mm)||1.8 lbs (0.8 kg)||/|
|JA-MG-SS75||8.0” (203 mm)||2.0” (50 mm)||7.5 lbs (3.4 kg)||Ø3/4” (Ø19.05 mm)|
|JA-MG-SS150||8.0” (203 mm)||4.0” (102 mm)||15.0 lbs (6.8 kg)||Ø3/4” (Ø19.05 mm)|