Square Soft Iron Block Anode

The soft iron anode is especially useful in protection against stress corrosion of copper alloys. Therefore, the soft iron anode is mostly applied to the corrosion protection of copper alloy tubes found in heat exchanger, condensers, pumps, fresh water facilities, desalination plants (evaporator, brine heater) and cooling systems of power plants. It is also used as a positive pole which has less carbon than other general irons.

Category:

Condenser Anodes, Pure/Soft Iron Anodes

Tags:

Anode Block, Block Anode, Condenser Anode, Galvanic Anode, Pure Iron Anode, Sacrificial Anode Cathodic Protection, Slab Anode

Quality Substrate Material

Our soft iron anode is made from high grade raw material conforming to armco iron standards.

Element	Content
Manganese (Mn)	0.2% max.
Copper (Cu)	0.2% max.
Aluminum (Al)	0.1% max.
Cadmium (Cd)	0.1% max.
Silicon (Si)	0.01% max.
Nickel (Ni)	0.001% max.
Phosphorus (P)	0.01% max.
Sulphur (S)	0.007% max.
Carbon (C)	0.004% max.
Iron (Fe)	Remainder

Easy Installation
The soft iron block anode is installed bare in the direct contact to the surface of protected structure.

Strict Quality Control
By conforming to ISO 9001:2015 standards, our soft iron anodes are manufactured, inspected, and tested in accordance with stringent procedures to ensure high quality.

Customized Configurations
Based on over 50 years’ production experience, we can customize the anode shape, sizes, and service life to meet your specific needs upon request.

Item No.	Width	Height	Weight
JA-FE-S44	3.9” (100 mm)	1.2” (30 mm)	2.0 kg (4.4 lbs)
JA-FE-S110	5.9” (150 mm)	1.2” (30 mm)	5.0 kg (11.0 lbs)
JA-FE-S209	6.3” (160 mm)	2.0” (50 mm)	9.5 kg (20.9 lbs)
JA-FE-S309	7.9” (200 mm)	2.0” (50 mm)	14.0 kg (30.9 lbs)